Hot tub question

**Bubbasam** · 07-10-12, 05:04 PM

Not sure if this would be the right forum and if it's not by all means switch it to the right one, but I'm looking for a pseudo hot tub genius. I have a 1991 sundance cameo hot tub. I have reason to believe my control panel board is shot, and I'm looking to replace it with a retrofit kit. Any experts out there who might be able to help answer some questions to get me to the right kit? Basic info - 2 speed pump (only one - not 2 pumps), 2 speed blower, and light. 2" piping is what I have also. I've seen ozone?? as one of the outputs of some of the kits --not sure it that applies to my hot tub or not. Any help would be greatly appreciated.

**SmokenScion** · 07-10-12, 06:02 PM

Thought you were gonna ask if you can get pregnant from sitting in a contaminated tub...Lol!

**Alundil** · 07-10-12, 06:05 PM

Single two speed pump, little blower and light 2" pipe....

Ah the ridiculous word play possible with that...

But yeah I was not expecting a DIY thread either.
Sent via highly charged bolt of electricity.

**SmokenScion** · 07-10-12, 06:17 PM

Sundance Control Panels

**Bubbasam** · 07-10-12, 06:35 PM

Originally Posted by Alundil

Single two speed pump, little blower and light 2" pipe....

Ah the ridiculous word play possible with that...

But yeah I was not expecting a DIY thread either.
Sent via highly charged bolt of electricity.

You guys must be a lot younger than I am.....I didn't think that was a sexually charged question at all LOL. But the 2" pipe does remain valid for the hottub or me.

**Bubbasam** · 07-10-12, 06:37 PM

Originally Posted by SmokenScion

Sundance Control Panels

Thanks Smoken...I've found that website, but the newer retro fit kits (balboa brand) are cheaper than the sundance ones. I just can't figure out which one is EXACTLY the one I need.

**SmokenScion** · 07-10-12, 06:53 PM

6600-211, Sundance Spas 800 Series Control Panel, 1 Pump 91-93.
theres no details on it, other than 1 pump, year, and model.

**Bubbasam** · 07-10-12, 07:00 PM

Originally Posted by SmokenScion

6600-211, Sundance Spas 800 Series Control Panel, 1 Pump 91-93.
theres no details on it, other than 1 pump, year, and model.

That looks good.....$430 is very comparable to the new Balboa systems I've seen, and it is sundance.

**deputyfestus** · 07-10-12, 07:09 PM

If your temp control still works just replace with manual air switches for blower and pump. I was a pool and spa tech way back in the 80's lol . You may have low voltage electric system , I'd need pics to really be of any help srry.

**Bubbasam** · 07-10-12, 09:03 PM

Originally Posted by deputyfestus

If your temp control still works just replace with manual air switches for blower and pump. I was a pool and spa tech way back in the 80's lol . You may have low voltage electric system , I'd need pics to really be of any help srry.

Temp control doesn't work, it goes right to an error message FLO. That indicates no flow through the heater, and after 3 to 5 minutes it goes to the "----" watchdog error - which shuts down the spa completely to prevent damage. I could change components on the main control board like you said, but it's cheaper and easier to replace the entire innards and start with all new components. I just need to know which kit works for what I have. I don't want any extra stuff which I don't need, but I need everything my tub needs to make everything work right.