Time For A New Rig

**HeavyG** · 03-16-12, 11:53 AM

You won't regret the dual 570s. I have been using that setup for over a year and they decimate all in their path. Your Sandy Bridge-E should also provide a nice boost!

**BigHub** · 03-16-12, 12:59 PM

Regarding the H100 cooling system.. I have the H50 and it works extremely well and they are easy to install. You won't be disapointed.

Sent from my HTC Thunderbolt

**Nuckle** · 03-23-12, 04:04 PM

Finishing up now, here are a couple pics. I will add more this weekend.

**DJ Ms. White** · 03-23-12, 06:19 PM

Nice

Sent from my SAMSUNG-SGH-I727 using Tapatalk

**HeavyG** · 03-23-12, 06:30 PM

Sweet Jesus.

**dex71** · 03-23-12, 06:35 PM

Screw driver - check
Flashlight - check
Coors Light - triple check

Nuck's going in.

Give it Hell, and rendezvous with us in BF3Land.

**Nuckle** · 03-23-12, 09:02 PM

All installed, threw in a 1TB slave for good measure. Will post some case shots tomorrow.

Sent from my iPhone.

**DancingCorpse** · 03-23-12, 11:19 PM

Your cable management scares me.

**Nuckle** · 03-23-12, 11:29 PM

Originally Posted by DancingCorpse

Your cable management scares me.

Why? Try being specific so I can learn seething.

Sent from my iPhone.

**DancingCorpse** · 03-23-12, 11:43 PM

Zip ties and twist ties are you best friend here. Those little popped up slats of metal and those double square holes with the piece of metal between them? Those are tie downs for zip ties and twist ties (your case or Mobo should have come with some zips). If there are holes in the case back plate (what the Mobo is screwed into) near the top, try to get any cables that are going near there on the Mobo to go through there, and the same for any wires going from the back to the front.

Use the zip ties on the back of the case back plate (opposite side of the mobo) to use the zip ties the most, so that cables don't stick out or move when you try to put the side back on or take it off.

Any unused cables from your Power Supply, zip tie them all together in a bundle so you set them neatly down on the bottom.

Also, is there a hole or grate under where the Power Supply is? Because if there is, you probably have it upside down. If you flip it over, it will be sucking in cool air instead of the already hot case air. Will give your Power Supply more life.